The first true clamp designed for hobby penis enlargement (PE) work. Gone are the days of hand exercises you can’t master, fussing with padding, not having the right size starting girth, using cable clamps not designed for PE work, trying to maintain erections or poor erection quality, and above all…the frustration of not gaining because you couldn’t figure out how to make clamping work! (Patent Pending)
The entry level python is now available with new 3.0 features and in A or B versions:
The Model A is back .!!!
When the Python Clamp was originally offered it came in 2 sizes, referred to internally as Model A and Model B. By popular demand, the Model A returns with enhanced 3.0 features including:
2 Inch Opening Size:
The opening size mates with a wider selection of pump cylinders than the larger 2.5” opening found on the Model B. Pump cylinders must have an opening or base flange wider than 2 inches for proper mating to the clamp seal.
New opening size channels pressure into the shaft, resulting in fewer pumps and higher contact pressure for those with thinner starting girths. Proper sizing also reduces air bubbling of inserts or sleeves.
The Model A fits shaft sizes from 3 inches (76.2MM) to max 5.5 (139.7MM) inches base girth, ranged to fit the vast majority of users. The ideal girth size according to many sources online is 5 1/2 inches, meaning the Model A is all you need to take you to that prized Goldilocks thickness. For those at the 5.5 inch threshold the Model B is your choice, fitting sizes from 5.5 inches (139.7MM) to 7.5 (190.5MM) inches in girth.
Model A
The Model A fits shaft sizes from 3 inches (76.2MM) to max 5.5 (139.7MM) inches base girth, ranged to fit the vast majority of users.
Model B
Fits sizes from 5.5 inches (139.7MM) to 7.5 (190.5MM) inches in girth.
FEATURES
Semi-Assembled: Ships with 1 insert pre-installed. Some assembly required.
Simple: The device is designed for ease of use, with a focus on new PE users. Operation is one handed, universal, with a single knob to control pressure. Built strong for repeatable sessions.
​
Versatile: The device can be used by itself as a standalone clamp, in concert with more Python clamps (units can be stacked), with your hands, or with a vacuum penis pump to provide amazing internal pressure every session.
​
Emergency Release: Instant pressure release with the included safety valve or by removing the hose from the clamp.
​
Compression Pumping: Traditional vacuum penis pumps deliver slow progress by themselves and often require high vacuum pressures that can cause injury to see results. The Python increases internal pressure during your pumping sessions while lowering the required vacuum pressure to see results, keeping you safer while increasing session effectiveness. Lower operating vacuum pressure means greatly reduced chances for blisters...! Best of all, your pump can be used to gain an erection for each clamping set.
​
​Skin Safe Silicone: Unlike the cheap toys you may find online made from toxic chemicals, all components are made from the same type of silicone featured in Hollywood special effects makeup.!
​​
​​Smooth Seal: No hard points to pinch your skin like cable clamps or press on delicate nerves.
​Powerful: 2 pressure stages for both new and advanced users. Stage 1 is designed for those new to PE work, providing ample compression power while also yielding when pressure limits reach higher levels reserved for advanced users. Stage 2 provides a grip strong enough to impress even veterans of the PE community. Combined with a traditional penis air pump, the clamp can deliver amazing levels of clamping force.
​
NOTE: Install second sleeve on top of first sleeve for stage 2 level clamping pressure.
​
Shockloader: Forget hand exercises or cable clamps to shockload (break down) and weaken tissues before your length stretching sessions. The Python squeezes tight from the start to create micro-tears more effectively for the most effective stretching sessions.
​
Quality Components: Made in the USA. Constructed of heavy duty machined components and medical grade parts, the device is designed for long term PE career use. The modular design can be repaired and upgraded as well, providing more value for your money!
​
Unique Design: Created by a research and development medical device designer with over 25 years of PE experience.
​
Two sizes - fits 99% of men:
The Python fits 3.5 inch (76.2MM) to 7.5 inch (177.8MM) erect circumferences.
​
Item Dimensions:
Width of frame: 4 inches (101.6MM)
Height of frame: 1 inch (25.4MM)
Frame Opening width: 2.5 inches (63.5MM)
​
​
​
What's included?
Clamp
1 Molded insert
2 quick disconnectors
Bulb
1 wrench
pump gasket
Compatible with most popular cylinder pumps on the market.
Waterproof-
Comes with the popular Python Plus pump hose for more versatility, allowing you to attach more powerful pumps (sold separately) to the clamp.
Allows you to rest the bulb or pump on a nearby table, bed, or beside a bathtub for increased comfort.
Easy to Use-
The tried and true Quick Kit continues, allowing you to adapt your existing penis pump (sold separately) to the clamp for faster insertion and removal.
Enhanced Heavy Duty Frame-
Now with flat bottom side for more secure mating to pump cylinders
Python Clamp Overview
Video Clamping Guides
Python Clamp Demo Video
Overall Girth (Python Clamp) EU Edition
Mid Shaft Girth (Python Clamp) EU Edition
